Dannmar DT-50 Tire Changer & MB-240X Wheel Balancer Combo

$4,494.00

Please call us for customization options.

This Dannmar tire changer and wheel balancer package consists of a DT-50 swing arm tire changer and a MB-240X post mount wheel balancer with manual spin.

Dannmar’s DT-50 sturdy body, rigid 45 mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during daily tire service procedures. The DT-50’s supersized turntable offers an internal clamping capacity of 26” and external clamping capacity of 24”. With so many time-saving and well-engineered features, you’ll be glad you chose the affordable Dannmar DT-50 Tire Changer.

The Dannmar DT-50 swing-arm tire changer is affordable and incorporates controls mounted upfront that are logically arranged for both speed and ease-of-use. The tire changer is designed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging allow wheels.

The Dannmar MB-240X manual-spin wheel balancer works on wheels up to 26” diameter. Dannmar’s very accurate and dependable balancer uses proprietary Digital Sensor Technology for critical reliability and repeatability. With this science, it automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that shows the correct amount and location of weights in about six seconds.

By easily rotating a large crank (similar in appearance to a large wing-nut) attached to the Post Mount wheel balancer’s axis, you simply spin the wheel and observe the electronic digital display of information. Then add the required weights to achieve a perfect balance. Basic spin balancing with manual operation makes this wheel balancer Dannmar’s most affordable unit.

Features

DT-50

Swing arm
High torque electric turntable
Alloy steel mount and demount head
Wheel clamping method 4 clamps internal rim clamping
Capacity 12”– 26” (305 mm - 660 mm)
Maintenance-free gearbox
Aluminum pneumatic cylinders
High pressure polyurethane pneumatic tubing
Inflation gauge with Integrated air dump valve
Tool tray/storage
Enhanced bead breaker blade
Oiler/lubricator
Air regulator
Inflation restraint
Forged-steel foot pedals

MB-240X

Basic dynamic wheel balancing function
Balance an entire set of wheels
Check the dynamic balance of suspected out-of-balance wheels
Low-cost of ownership
Computerized electronic data display for each balance
Easy to use
Good companion equipment to a Dannmar Tire Changer
Quiet operation
Perfect for small garages, car-hobby garages, or a backup
Works well on many trailer wheels too

Specifications	DT-50
Max Tire Diameter	49” (1,245 mm)
Internal Rim Clamping Capacity	14” – 26” (356 mm - 660 mm)
External Rim Clamping Capacity	12” – 24” (305 mm - 610 mm)
Turntable Rim Width Capacity	3” – 15” (76 mm – 381 mm)
Bead Breaker Rim Width Capacity	3” – 14” (76 mm – 356 mm)
Bead Seating System	Turbo Blast / Bead Seating
Wheel Clamping Method	4 Clamps - Internal / External
Table Clamping System	Dual Pneumatic Cylinders
Tower Design	Rigid Fixed / Swing Arm
Power Assist Tower	N/A (See DT-50A)
Noise	<70 dB
Air Requirement	110-175 PSI (8-10 BAR)
Drive System Type	Electric / Air
Motor	110-VAC / 50-60 Hz / 1Ph

Specifications	MB-240X
Max Tire Diameter	31.5” (800 mm)
Wheel Diameter Capacity	12” - 24” (305 mm - 610 mm)
Wheel Width Capacity	4” - 15” (102 mm - 381 mm)
Max. Tire Weight	150 lbs. (68 kg)
Balancing Modes	Multiple ALU Modes
Drive System	Ball Bearing / Manual
Wheel Braking	Hand Brake / Manual
Cones Included	Standard Cone Set
Cycle Time	7 seconds
Balancing Increments	0.25 or 0.01 ounce
Balancing Speed	140 RPM
Accuracy	+- 1 Gram (.035 oz)
Motor	110VAC / 50-60 Hz / 1Ph