Challenger SA10 - 10,000 LB Capacity 2 Post Lift

$5,820.00

Please call us for customization options.

Please call before placing an order

Challenger Lifts' SA10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop. The SA10 features 3-stage front arms that provide maximum extension and retraction ensuring safe and reliable lifting on all vehicles within rated capacity

With adjustable height and width options, double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the SA10 will accommodate the rigorous demands of a full service facility. Available in red and blue.

Our two post lifts come with accessories to turn your two post vehicle lift into a complete productivity center. All Challenger two post lifts are designed and manufactured to the highest standards for performance, durability and longevity.

Optional Accessories

Challenger 10315 Stack Adapter Extension Kit Stack Adapter Extension Kit P/N 10315
Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.

Features

3-stage front arms provide greater overall arm sweep
Set up in a symmetric or asymmetric configuration
Adjustable height and width options accommodate varying service bay sizes
Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
Rubber foot pads minimize stress to vehicles with delicate undercoatings
Padded overhead shut off system prevents vehicle damage
Single-point mechanical lock release system allows technician to disengage both columns simultaneously
Wide rubber door guards protects vehicle from door damage
Premium powder coat finish provides long-lasting durability
Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability
Mirrored “S” shaped column

Model Number	SA10
Lift Configuration	Symmetric Configuration	Asymmetric Configuration
Lift Capacity*	10,000 lbs. (4536kg)
A - Rise Height ¹	74.5" (1892mm)
B - Overall Height	136.5”
C - Overall Height (Cylinder Extended)	142.5"
2’ Height Extension Available	Yes
D - Overall Width	129” / 135”	131.5” / 137.5”
E - Drive-Thru Clearance	92.75” / 98.75”	88.5” / 94.5”
F - Floor to Overhead Switch	131.125” / 137.125”
G - Short Arm Reach	22.375” / 41.5”
H - Long Arm Reach ² (min/max)	38.25” / 59”
I - Screw Pad Height	4.75” / 6.875”
J - Inside of Columns	106.75” / 112.75”	101.5” / 107.5”
Motor	2HP, Single Phase, 60Hz
Voltage	208v - 230v
Speed of Rise	48 seconds
Max. Load per Arm	2,500 lbs. (1134kg)
Ceiling Height Required	12 (3658mm)

*Lift capacity ratings are based on loads equally distributed on all four arms.

Rise Height is measured with telescoping screw pads in highest position.
Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm)
Overall width of Asymmetric lift is 11' 3"' / 11' 9" including power unit

Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction

SA10 Two Post Lifts

Collections: 2-Post Lifts, All, Lifts, Popular Items

Category: 2 post lift, 2post, ali, auto lift, Car Lift, certified, challenger, double post, etl, sa10, two post, Two Post Lift