Challenger CL10V3 Versymmetric Plus 2-Post Lift 3-Stage Front and Rear Arms - 10,000 lb. Lifting Capacity

The Challenger Lifts CL10V3 is an industry first two post lift with standard Versymmetric® offset 3-stage front + 3-stage rear arms. This arm configuration provides maximum arm sweep, retractionand reach, and single sweep spotting of virtually any vehicle.

Other CL10series two post lift features include double telescoping screw pads, Heavy-Duty pulleyand cable equalization system, elongated carriage, fully gusseted base plate design, single point mechanical lock release and padded overhead shut off the system.

 

Challenger CL10V3
4,513.00 USD

CL10V3

Challenger LE10 Versymmetric 2 Post Lift Asymmetric Application-10,000 lb. Lifting Capacity

The Challenger Lifts E10 two post automotive lift features Challenger’s innovative Versymmetric® Technology, providing technicians the versatility to lift vehicles both symmetrically and asymmetrically within the same service bay. This exclusive technology facilitates increased efficiency and revenue potential.

With double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the Challenger Lifts E10 two post lift will accommodate the rigorous demands of a full service facility – and afford room to grow with its competitive price. This spectacular 2 post lift is available in red and blue.

 

Challenger LE10
2,895.00 USD

LE10

Challenger CL12 2 Post Heavy-Duty Lift 12,000 lb. Lifting Capacity

The NEW Challenger CL12 12000 lb. capacity lift is now equipped with 3-stage front and rear arms, and also a new jacketed mechanical lock release system. With this new configuration, the CL12's now provide 10-1/2" more retraction and 5" more extension.

 

Whether you want to expand your fleet service capabilities, avoid downtime or just increase your bottom line, Challenger Lifts CL12 2 post automotive lift is the solutions for your servicing needs. Not only does our CL12 Heavy-Duty lift a lot, but it’s also a lot of lift.

 

Challenger CL12
6,841.80 USD

CL12

Challenger E12 2 Post Heavy-Duty Symmetric Lift 12,000 lb. Lifting Capacity

The Challenger Lifts 12,000 lb. capacity E12 2 post car lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. Its adjustable height accommodates higher profile vehicles and provides ample headroom for day to day servicing.

 

Other features of these 2 post lifts include Heavy Duty 2-stage telescoping arms, automatic arm restraints, rubber protective door guards, single point mechanical lock release system and padded overhead shut off the system.

 

Challenger E12
5,180.50 USD

E12

Challenger E15 2 Post Heavy-Duty Lift 15,000 lb. Lifting Capacity

The Challenger Lifts 15,000 lb. capacity E15 2 post car lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. Its adjustable height accommodates higher profile vehicles and provides ample headroom for day to day servicing.

 

Other features of these 2 post lifts include Heavy Duty 2-stage telescoping arms, automatic arm restraints, rubber protective door guards, single point mechanical lock release system and padded overhead shut off system.

 

Challenger E15
8,383.10 USD

E15

Challenger 15000 HD Two Post Vehicle Lift

The Challenger Lifts 15,000 lb. capacity E15 2 post car lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. Its adjustable height accommodates higher profile vehicles and provides ample headroom for day to day servicing.

 

Other features of these 2 post lifts include Heavy Duty 2-stage telescoping arms, automatic arm restraints, rubber protective door guards, single point mechanical lock release system and padded overhead shut off system.

 

Challenger 15000
12,704.60 USD

15000

Challenger 18000 2 Post Heavy-Duty Lift 18,000 lb. Lifting Capacity

Whether you want to expand your fleet service capabilities, avoid downtime or just increase your bottom line, Challenger Lifts 18,000 lb. two post automotive lift is the solutions for your servicing needs. Not only does our 12000 Heavy-Duty lift a lot, it’s a lot of lift.

The 18,000 lb. heavy duty two post lift has features that you would expect to pay more for, like low profile arms, padded overhead cut-off bar, adapter accessories, etc. In fact, no other automotive lift company gives you more.

 

Challenger 18000
17,264.55 USD

18000

Challenger Lifts Floor Plate Two Post Lift 3-Stage Front and Rear Arms - 9,000 lbs. Lifting Capacity

The Challenger Lift CLFP9 two post automotive lift is packed with features that will accommodate a wide variety of vehicle lifting points such as short and long wheelbase, along with wide-body imports. This 2 post lift also features a 10’ 7/8” overall column height, making it ideal for low ceiling applications. With standard front and rear 3-stage arms, the Challenger Lift CLFP9 provides maximum arm sweep, arm retraction and reach.

 

Challenger LFP9
3,609.05 USD

CLFP9

Challenger CL10V3-QC Quick Cycle Versymmetric Plus 2-Post Lift 3-Stage Front and Rear Arms- 10,000 lbs. Lifting Capacity

When improved lift speed of rise and lowering time is important to your vehicle service applications, Challenger has developed a simple solution. Challenger Lifts has added Quick Cycle Lifting as an innovative and cost efficient option that will increase rise and descent speed on our most popular 10,000 lb. lifts.

The Challenger CL10V3-QC is an industry first two post lift with standardVersymmetric® offset 3-stage front + 3-stage rear arms. This arm configuration provides maximum arm sweep, retration and reach , and single sweep spotting of virtually any vehicle.

Other CL10series two post lift features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, elongated carriage, fully gusseted base plate design, single point mechanical lock release and padded overhead shut off system.

 

Challenger CL10V3-QC
5,438.20 USD

CL10V3-QC

ProKar PK9TPC

The ProKar PK9TPC 2 Post Car Lift is a 9,000 lb. capacity Asymmetric Lift. Equipped with a heavy-duty leaf chain, steel pulleys, high-strength cable equalization system, SPX ETL Verified Motor & Pump Assembly, and everything you would expect from a quality 2 post lift.

The Prokar PK9TPC is powered by the 208/230V SPX Motor & Pump Assembly that is specifically designed for use with 2 posts and 4 post lifts. The SPX Motor & Pump Assembly is ETL Verified to conform to the A.N.S.I/UL201 standards, unlike the common Chinese Motor & Pump Assembly. The black reservoir tank is constructed of a polymer that is UV resistant, and will not fade or crack with excessive exposure to UV light. The 2 HP motor has a factory set torque rating equivalent to a 3 1/2 HP Unit.

 

ProKar PK9TPC
2,195.00 USD

PK9TPC

ProKar PK9TPB

The ProKar PK9TPB 2 Post Car Lift is a 9,000 lb. capacity Asymmetric Lift. Equipped with a heavy-duty leaf chain, steel pulleys, high-strength cable equalization system, SPX ETL Verified Motor & Pump Assembly, and everything you would expect from a quality 2 post lift.

The Prokar PK9TPC is powered by the 208/230V SPX Motor & Pump Assembly that is specifically designed for use with 2 posts and 4 post lifts. The SPX Motor & Pump Assembly is ETL Verified to conform to the A.N.S.I/UL201 standards, unlike the common Chinese Motor & Pump Assembly. The black reservoir tank is constructed of a polymer that is UV resistant, and will not fade or crack with excessive exposure to UV light. The 2 HP motor has a factory set torque rating equivalent to a 3 1/2 HP Unit.

 

ProKar PK9TPB
2,195.00 USD

PK9TPB

ProKar PK11TPD

The ProKar PK11TPD 2 Post Lift has a cylinder mounted at top to create greater lifting strength with a lifting capacity of 11,000 lbs. The ProKar PK11TPD sports a 12' solid 1 piece column, overhead cylinder, powder coat finish, the SPX Motor & Pump Assembly, and 99.5" of drive-thru clearance. This 11,000 lb. Lifting Capacity 2 Post Car Lift has a lifting height of 71", extra large carriage, arms built for trucks yet low enough for sports cars (4"), grear style arm locks, truck & van extensions included, tire drive thru clearance of 96", and cylinders mounted at top of column for added strength. The Prokar PK11TPD is powered by the 208/230V SPX Motor & Pump Assembly that is specifically designed for use with 2 post lifts and 4 post lifts. The SPX Motor & Pump Assembly is ETL Verified to conform to the A.N.S.I/UL201 standards unlike the common Chinese Motor & Pump Assembly. The black reservoir tank is constructed of polymer that is UV resistant, and will not fade or crack with excessive exposure to UV light. The 2 HP motor has a factory set torque rating equivalent to a 3 1/2 HP Unit.

 

Prokar PK11TPD
2,495.00 USD

PK11TPD

ProKar PK12TPC

The fully gusseted oversized base plates on the PK12TPC and the big lifting arms with reinforced swivel pin holes promise years of reliable service. This is a heavy duty two post lift with Direct Drive Cylinders.

 

ProKar PK12TPC
3,605.00 USD
( Sales tax and shipping costs not included )

PK12TPC

ProKar PK12TPB

The ProKar PK9TPB 2 Post Car Lift is a 9,000 lb. capacity Symmetric Base Plate Car Lift. Equipped with a heavy-duty leaf chain, steel pulleys, high-strength cable equalization system, SPX Motor & Pump Assembly, and everything you would expect from a quality 2 post base plate car lift.

The Prokar PK9TPB is powered by the 208/230V SPX Motor & Pump Assembly that is specifically designed for use with 2 post lifts and 4 post lifts. The SPX Motor & Pump Assembly is ETL Verified to conform to the A.N.S.I/UL201 standards, unlike the common Chinese Motor & Pump Assembly. The black reservoir tank is constructed of a polymer that is UV resistant, and will not fade or crack with excessive exposure to UV light. The 2 HP motor has a factory set torque rating equivalent to a 3 1/2 HP Unit.

 

 

 

Prokar PK12TPB
3,900.00 USD
( Sales tax and shipping costs not included )

PK12TPB

ProKar PK15TPC

The ProKar PK15TPC has a lifting capacity of 15,000 lbs. It comes equipped with dual 3" diameter cylinders with low friction chain rollers.

 

Prokar PK15TPC
4,140.00 USD
( Sales tax and shipping costs not included )

PK15TPC

Affordable Automotive Equipment Inc., located in Orlando Florida, has been in the automotive equipment industry for over 22 years. Our sales team has the knowledge and experience to help you with any questions you may have about any of our 2 post car lifts. We stand by the automotive lifts we sell whether to a home consumer, or automotive shop. Our Challenger Lifts line of car lifts are the one of the best on the market.

As our economy has changed, and the competitive nature of the automotive business has increased, being able to buy an American Made product is more valuable to all of us. Challenger Lifts 2 Post Lifts are "American Made", and ETL Certified. Take a look at the Challenger CL10V3, CL10V3-QC, 12000, or the 15000. What you will find is a product that is engineered to last for commercial or residential use.

Our 2 Post Car Lifts are designed to rigid safety standards. We are the best distributor network in the industry, have the best value in the industry, skilled service, support and prompt response. So, please give us a call if you have any questions about our line of Challenger Lifts, Quality Lifts, or ProKar Lifts.

 

More Useful Information on 2 Post Car Lifts

2 post car lifts are the most commonly used automotive lift design in the entire world. The lift design features 2 sets of lifting arms attached to two independent columns. At designated pickup points on the frame a vehicle is driven between the lift columns, and the arms of the lift are manually positioned under the vehicle to lift it. The lifting capacity of these 2 post lifts ranges from 7,000 lbs., to your more heavy duty lifts of 18,000 lbs. Two post lifts are generally used for preventative maintenance, repairs, and storage.

 

Features & Benefits

  • Initial purchase price is low along with the cost of installation
  • Very versatile. Provides easy access to most of the vehicle undercarriage and drive train
  • Wheels hang free, so wheel, brake, steering and suspension work is possible
  • Ease & fast installation because no digging is required
  • Equipped with adapters which make it possible to lift a variety of different vehicles
  • Positioning the vehicle is quick and easy using a spotting dish on the floor
  • Ease of maintenance
  • Relocation is easy if necessary
  • Hydraulic fluids is above ground making them environmentally friendly
  • Very flexible with a wide range of available vehicle contact configurations
  • Can be equipped with fixed contact pads for faster spotting
  • To maximize working height under tall vehicles extended height models are available
  • For shops with ceilings as low as 10 feet models are available for low-ceiling shops
  • To save technicians steps and maximize productivity, some models come with controls on each column

2 Post Lift Limitations

  • Productivity may be affected due to lift columns can get in the way
  • Restricted access to the vehicles passenger compartment due to columns, or the columns can damage doors if care is not taken
  • Overhead bar can limit lifting heights on tall vehicles (low ceiling models available)
  • Reduction in technician efficiency due to lack of working space
  • Shorter life compared to in-ground lifts (10 to 15 years)

Different 2 Post Lift Designs

2 post car lifts are typically designed either asymmetrically, symmetrically or "Two-in-one" designs offered by Challenger Lifts. A true asymmetrical design have the lift columns rotated 30 degrees. With this design, the vehicle's center of gravity is approximately in line with the optimum load capability of the columns, therefore reducing unnecessary wear and tear on the lift columns, carriages and bearings. It also allows maximum door opening on passenger cars for improved access to the vehicle's interior, and under the dash. The columns of true symmetrical lifts are not rotated. The symmetrical design centers the vehicle load between the columns to maximize the lifting capacity. You will find symmetrically designed lifts are preferred to be used on large vehicles. Two-in-one or Versymmetric Lifts, a registered trademark of Challenger Lifts, are lifts that have short arms on the front, and long arms in the rear. Challenger Lifts has designed the first and only 2 post lift on the market with both 3-stage front and 3-stage rear arm configurations. This allows maximum arm reach and retraction to meet the recommended lifting points of the widest range of vehicles. 3-stage front arms enable maximum retraction for lifting wide body imports with designated outside lift points. 3-stage rear arms enable maximum reach for hitting the lift points of long wheelbase vehicles. These lifts are designed to lift just about any vehicle on the market within each lifts lifting capacity.

 

Affordable Automotive Equipment

428 Barry Street

Orlando, FL 32808

 

Call 1-800-226-2035 or use our contact form.

FREE CATALOG
PLEASE SUBSCRIBE TO EMAIL TO GET LATEST VERSION OF CATALOG
Affordable catalog PDF.pdf
Adobe Acrobat document [6.5 MB]

Subscribe to our mailing list

* indicates required

Get Social with Us.