The Turf Rail is an attachment for two post automotive lifts, designed to pick up turf and all terrain equipment by wheel engagement. The patented system has two rails that engage onto the height adapters of most two post symmetric designed lifts and then two adjustable trays attach to the rails and are fully adjustable from wheelbases ranging from 26” to 116”.
Turf Rail Quick Change Attachment designed to pick up turf and all terrain equipment, 7K capacity, Adjustable wheel base of 26 in. - 116 in., For use on CL10, LE10, CLFP9. Powder Coated fi nish, Optional fi ller pads for small diameter wheels.
10’ 7/8” overall column height
Low profile drive-over floor plate
3-stage front + 3-stage rear arms
Dual point mechanical pull-lock cable release system
Premium powder coat finish
Plated Arm Pins
Rubber foot pads
|Lifting Capacity*||9,000 lbs.|
|A: Rise Height(1)||79-1/8"|
|B: Column Height||10' 7/8"|
|C: Overall Width||11' 5-1/2"|
|D: Drive-thru Clearance||98-3/16"|
|E: Front Arm Reach||24-1/2" - 44-1/2"|
|F: Rear Arm Reach||24-1/2" - 44-1/2"|
|G: Screw Pad Height(2)||Adj. 4-1/8" - 7-1/8"|
|H: Inside of Columns||109"|
|Ceiling Height Required||10' 1-7/8"|
|Motor||2HP, Single Phase, 60Hz|
|Voltage||208 - 230v|
|Speed of Rise||60 seconds|
|Max. Load Per Arm||2,250 lb.|
|*Lift capacity ratings are based on loads equally distributed on all four arms.|
|1 Rise height measured with telescoping screw pad in highest position|
|2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4".|
Affordable Automotive Equipment, Inc.
428 Barry Street
Orlando, FL 32808
Call 1-800-226-2035 or use our contact form.