Challenger 4015XFO
The Challenger Lifts 4015 series
4-post hydraulic auto lifts have a cable lifting design, operate on 208-230v single phase electrical power (optional 3-phase available), have a single point air actuated lock release that disengages
all column locks simultaneously for maximum productivity and workflow. 4015series four post auto lifts boast the most working room underneath the runways with the highest rise in the industry at 78”,
and the lowest profile runways in the auto lift business at 7”. With large 9 ½” steel pulleys with Teflon® bearings, ½” cable thickness, fully gusseted base plate and top shroud, offset wrapped
column design and louvered approach ramps with anti-skid runway surfaces, the 4015series four post lift is built to lift and built to last.
Featuring a maximum wheelbase range of 182 ½” or 210”, the 4015 accommodates
everything from smaller passenger cars and trucks to medium duty fleet operation vehicles for general service.
Features:
Model |
4015XFO |
Lifting Capacity: |
15,000 lbs. |
Length Overall: |
276" |
Width Overall: |
142" front - 134 1/2" rear |
Inside Columns: |
120" front - 120" rear |
Between Columns: |
222 1/2" |
Height of Columns: |
99 1/2" front - 93 1/2" rear |
Height of Runways: |
7" |
Width of Runways: |
20" |
Width between Runways(Min/Max): |
43" |
Maximum Wheelbase |
210" |
Rise Height: |
78" |
|
|
Air Supply Required: |
90 -120 psi Clean & Dry |
Motor: |
2HP |
Voltage(1Phase Std.)(2:) |
208v - 230v |
Speed of Rise: |
85 Sec. |
Min. Recomm. Bay Size: |
12' x 26' |
1 Maximum wheelbase is based on a tire diameter of 30". |
|
2 Optional 3 phase electrical also available. Standard lift colors are Red and Blue. |